• Free Delivery

    On All Orders Over £40

  • Next Day Delivery

    On Standard Products Ordered by 12pm

  • Best Prices

    We'll Beat any Online Trade Prices

  • Fast & Free Technical Advice

    For Products & Projects

Black Stove Paint

Black Stove Paint

A matt black heat-resistant paint which resists up to 200 degrees Celsius

£10.94 inc. VAT RRP £12.04

  •  

Overview

Black Stove Paint is a quick drying heat-resistant enamel for stoves, smoke boxes and chimneys. It is designed to revive and renew the look in a clean matt black finish. It offers outstanding hiding, durability and fade resistance properties. Our Black Stove Paint can be applied direct to the surface with a soft brush and is perfect onto primed or previously painted surfaces. The paint is cured further after the surface is taken to 200°C for 45 minutes.

FEATURES

  • Quick drying

  • Heat resistant

  • Clean matt black finish

  • Outstanding hiding, durability and fade resistance

  • Revives and renews the surface

Application:

Brush, Roller, Spray

Coverage:

10m² per litre

Number of Coats:

2 coats

Hard Dry

12 hours

Technical Info

Viscosity @ 20°C:

320 mPas

VOC Content:

450g/l

Usage

PREPARATION

Use Black Stove Paint over a wide variety of surfaces that have been suitably sanded and primed.

We recommend Symphony Narrowboat Paint Metal Primer.

Mild Steel: Abrade 80 – 180 Grit. Remove millscale and degrease with Prep Clean. Apply Metal Primer.

Aluminium: Abrade 180 – 320 Grit. Degrease with Prep Clean. Apply Etch Primer & Metal Primer if needed.

Galvanised Steel: Abrade 180 – 320 Grit. Degrease with Prep Clean. Apply Mordant Wash. Apply Etch Primer & Metal Primer if needed.

Previous Paint: Remove loose or blistered paint and flat down existing surfaces with 320 Grit sanding. Remove sanding dust by wiping with a Tack Rag. All surfaces must be sound, clean, dry and free from dust, grease or any other surface contaminants before application. 

APPLICATION

Stir well prior to use. Apply the first coat to a DFT of 50 microns (+/- 5 microns). Apply evenly in small sections by HD Foam Roller or Synthetic Brush. Leave to dry for a minimum of 12 hours before application of the second coat. Lightly abrade the first coat to provide a smooth finish. If required, add up to 5 - 10% Thinner 2611 or 2612 or 5% PPA brush additive to ease application. Avoid cold, damp or high humidity conditions.

Wish List

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK