• Free Delivery

    On All Orders Over £120

  • Next Day Delivery

    On Standard Products Ordered by 12pm

  • Best Prices

    We'll Beat any Online Trade Prices

  • Fast & Free Technical Advice

    For Products & Projects



0 Reviews

£82.54 inc. VAT

  • Not available for next day delivery. Please allow 2-3 days for delivery


Use Osmo Wood Protector prior to application of an oil from the Osmo Polyx Oil range. Recommended for use in bathrooms & kitchens (where wooden surfaces will be prone to moisture). Ideal for wood's susceptible to blue stain, such as Pine. Suitable for all interior wood, including kitchen work surfaces, flooring, window frames and joinery.



  • For Interior use

  • High Water Repellent and free of organic biocides

  • Easy to use

  • Suitable for wood and microporous

  • Resistant to saliva and perspiration, suitable for children’s toys



Brush, Roller, Dip






Number of Coats:


1 Coat


Drying Times @ 23°C


Touch Dry:

24-36 hours


Pot Life:


Up to 5 years if can is kept dry and closed tightly



Technical Info

Gravity (kg/l):




Viscosity @ 20°C:


>50s DIN EN ISO 2431/3 mm, viscid


VOC Content:


Max. 750g/l ​





  • Wood surface must be clean, dry and frost-free (moisture content max. 18%).
  • Osmo Wood Protector is ready to use, please do not thin.
  • Stir well before use.
  • Clean old microporous stains thoroughly.
  • Old paints and lacquers must be completely removed.
  • As a general rule, wear a dust mask during sanding works.
  • Fill small cracks, larger joints or holes in wood with Osmo Wood Filler.
  • The finished surface is influenced by many factors, including the wood's natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.
  • Osmo Wood Protector is compatible with all conventional types of glue and putty (except for products containing silicon).



  • Apply one time to the clean and dry wood with a Brush (we strongly recommend using the Osmo Soft Tip Brush), Osmo Microfibre Roller or by dipping.
  • Coat the clean, dry, frost-free wood generously – if possible, on all sides.
  • Dipping process: approx. 2 minutes dipping time Allow for good ventilation. Top coat should be carried out within one week.
  • Oils enhance the natural tone of wood (permanent wet effect). Osmo Wood Protector is not a self-priming finish. Within one week, a top coat (with an oil-based Osmo wood finish) should be carried out. When using Osmo Wood Protector on large areas under Osmo One Coat Only HSPLUS, glossy spots may appear because of the extremely high content of solids in this stain. Due to the strongly water-repellent effect, do not coat with water-soluble products (e.g. Interior Wax).



Clean tools with Osmo Brush Cleaner (free of aromatic compounds).

Review this product

Wish List

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK