OSMO WR BASE COAT CLEAR

Osmo WR Base Coat is a clear exterior wood preservative, designed to enhance the protection of softwood species.

This is a base coat - please over-coat with an Osmo Exterior Finishing Oil, such as Osmo UV Protection Oil or Osmo Natural Oil Wood Stain

For a deep coloured finish, we recommend a paint-like oil such as Osmo Country Colour.

IDEAL FOR
Most exterior wooden surfaces. Including:

• Windows
• Frames
• Roller Shutters
• Doors
• Pergolas
• Trellis
• Garden Furniture
• Timber Cladding

ADVANTAGES

• New improved formula
• Greatly extends the life of softwoods and pines, such as spruce, fir and hemlock
• Reduces wood swelling and shrinkage - oil penetrates deeply into the wood
• No sanding necessary for future applications
• Dries to clear finish
• Very faint odour - odourless when dry

PREPARATION

• Wood surface must be clean, dry and frost-free (moisture content max. 20%).
• Ready to use oil. Do not thin. Stir well before use.
• If you can, please apply the first coat to all sides before installation.
• Clean old microporous stains thoroughly, and remove old paints and lacquers.
• We recommend wearing a dust mask during sanding.
• Please conduct a trial application. The finished surface can be influenced by the condition of the wood.

APPLICATION

• Apply by brushing, dipping or flooding.
• For brush applications we recommend using Osmo Soft Tip Brush.
• Only spray in an enclosed unit.
• Coat generously.
• Apply to all sides of the timber before fitting.
• Before applying a protective oil coat on top, allow the WR Base Coat to dry for 12 hours at temperatures of 20 deg C / 65 % humidity. Lower temperatures and/or higher air humidity increases the drying time.

• Product Information
• Safety Data Sheet