BONDA WOOD FILL

0 Reviews

£15.13 inc. VAT

Not available for next day delivery. Please allow 2-3 days for delivery

Overview

Bonda Wood Fill is a two-part polyester, rapid hardening wood filler.

Simple to mix and apply, Wood Fill is easy to sand and is perfect for filling knots in timber, pin holes, defects etc, ensuring your wood has the ideal surface to achieve the perfect finish.
Available in Oak, Light Oak, Teak, Mahogany, Beech, Redwood, White, Pine, Ash and Ebony.

Features

Superior two component rapid hardening wood filler
Easy to mix and apply
Sands well to give an excellent base for finishing

Technical Info

Type	A two-part polyester filler
Intended Use	Easy to mix and apply and is used fill knots in timber, pin holes, defects etc. Easy to sand and tack free.
Coats	N/A
Curing Time	30 mins – 1 hr depending on temperature and humidity.
Recoating Time	Once fully cured and after sanding back, most paints can be applied
Application Temperature	Ideally 15-25°C, but do not use below 10°C.
Clean-up	All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Hazards	Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection. A full Health and Safety Data Sheet is available on request or from www.bondaglass.com

Usage

Bonda Wood Fill should be applied onto a clean and dry substrate
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio
Mix thoroughly until an even colour is obtained
Do not prepare more than is required as any excess will be unusable after 10 mins

Documentation

Product Information

Review this product

Wish List

BON10004
BON18004
BON18404
BON18204
BON19904
BON18304
BON18804
BON18604
BON18104
BON18704