MOLDEX 0503 SENSITIVITY SOLUTION

Bitter sensitivity solutions needed to perform qualitative fit testing with the Moldex fit test kit.

Each refill pack contains 6 ampoules of the respective solution.

1. Remove the protective crushing sleeve from the storage box.
2. Remove Sensitivity Test Applicator and/or the Fit Test Applicator from the storage box.
3. Slide the Sleeve all the way onto the Test Applicator.
4. Using your thumb and forefinger, “pinch” the applicator at the top of the tube to break the glass ampoule
5. Remove the end cap from the nebulizer. With the crushing sleeve still in place, insert the applicator tip nozzle into the opening of the nebulizer.
6. Carefully squeeze the applicator tube at the top of the tube to transfer the solution from the applicator down into the nebulizer until the applicator is completely drained of the solution.
7. Once the applicator solution has been drained into the nebulizer, the protective crushing sleeve should be returned to the storage box and the applicator should be safely disposed of.

• Moldex Bitter Solution Instruction Manual